Recycle approximately 14, 12 oz aluminum cans into a work of art with TESSCAR ALUMINUM CRAFT plans. They come complete with full size templates, step by step instructions.

DUE TO THE HIGH COST OF GAS, POSTAGE, INK, PAPER AND MY TIME PRINTED PLANS ARE NO LONGER AVAILABLE! ALL OF THE PLANS ARE NOW SENT BY E-MAIL (Adobe PDF) AND COST $8.00 USD EACH.

Tesscar Aluminum Craft
57101 Evergreen Lane
Warren, Oregon 97053
Questions or Comments E-mail: tesscaraluminumcraft@msn.com

Recommended Tools And Equipment
 

• Aviation snips-cutters for aluminum, tin and thin gage sheet metal.
   
  
• Scissors- 4" long blades, 8" overall. General purpose, straight trimmer.
   
  
• Sharpie permanent marker Pen-ultra fine point. (Black)
   
  
• Ruler, Steel 1-1/4" x 12" long. (Remove cork backing if equipped)
   
  
• Ruler, Steel- 3/4" x 6" long. (Remove cork backing if equipped)
  Rulers are used for measuring and as brakes for bending.
   
  
• Gloves-grip style, cotton jersey.
   
  
• Protective eyewear. (Safety glasses, goggles or face shield).
   
  
• Hobby Knife-x-acto with pointed blade. (#11) or equivalent.
   
  
• Contact Cement-QuickGrip or Omni-Stick. Available at most craft/hobby stores.
   
  
• Binder spring steel clips-small, 4 required.
   
  
• Tweezers-small.
   
  
• Nail polish remover.
   
  
• Scotch tape.
   
  
• Glue stick.
   
  
• Cotton swabs.

Butterfly: 8 3/4" High